replacement gripper for Asbell quiver

[Mike Bolin]

I have an old Asbell over the shoulder style quiver and I am in need of a new "arrow gripper". I believe that this part is still available but haven't been able to locate one. Any suggestions would be appreciated! Thanks, Mike

[Alexander Traditional]

I'm in the process of making one of my own that is on that order. I'm using a Great Northern replacement part,and going to thread a rod to screw into the replacement rubber. It looks like the GFA one is similar.

[Mike Bolin]

I've got an GN laying around somewhere, I may give that a try!

[Pat B]

Have you contacted Asbell. I don't know who makes these quivers for them but they might be able to help you find a new gripper.

This is a GFA style quiver I made as my primary hunting quiver. I removed the arrow gripper and hood from the limb mounting and attached it to a wood slat. I covered the wood with a scrap of snake skin for decoration and you can see the a fleece fletch cover wrapped around the wood slat until needed.

[Roger Norris]

Contact the Asbell's. I am almost certain they have grippers.

[Wudstix]

Pretty certain that was the old Delta quiver.

[Mike Bolin]

Thanks for the replies gentlemen. Going to contact Asbell's now!

[Pat B]

My GFA style quiver is an old Selway bow quiver.