Botched limb alignment .....

[TX FLY CASTER]

 Decided to build myself a new take down. Only have the Bingham drill jig....needless to say its off by around .020. Anyone ever fill the bolt and pin holes on a set of limbs and re drill? Curious if I could fill with smooth on.

[Bow Bender]

Smoth on should work or you could glue in a hardwood dowel or plug then re-drill.  Take care when re-drilling because the bit will want to drift to the softer material.

[4 point]

I've glued hard wood dowels in them with smooth on then redrilled. Covered them with a overlay and you couldn't tell I screwed up. I actually drilled the holes backwards once and had to fix that

[skeaterbait]

I use dowels as well.