2021 what did you do today?

4 point · August 27, 2021, 04:41:51 AM

Flyonline, i bought a board of it awhile ago so I'd guess it was imported. It's beautiful stuff. Looks similar to Koa.

flyonline · August 27, 2021, 05:39:16 AM

Sure is, I ran my hands over a stack of it a while back but they didn't have anything in a size that was usable so I had to pass it up, but I'll be back (when I can

).

Eric Krewson · August 27, 2021, 09:01:40 AM

I would give JB Weld a try first for a fix, really slop it on inside the break and out. It might not be pretty but it may work.

4 point · August 27, 2021, 07:33:34 PM

I JB welded a motor block back together on a small block Ford once. It was broken out where the motor mount bolts on. I cleaned it up good and glued it up. I drove it for a lot of years and it was still holding, never leaked a drop of coolant

Bvas · August 27, 2021, 08:02:00 PM

Quote from: 4 point on August 27, 2021, 07:33:34 PM
I JB welded a motor block back together on a small block Ford once. It was broken out where the motor mount bolts on. I cleaned it up good and glued it up. I drove it for a lot of years and it was still holding, never leaked a drop of coolant

Did ya throw some duct tape on it for extra insurance?

Bvas · August 27, 2021, 10:03:10 PM

Finally got a string on the latest build.

[attachment=1]I

Mad Max · August 27, 2021, 11:32:42 PM

Nice Bvas

Roy from Pa · August 28, 2021, 06:43:47 AM

Very nice Brad.

kennym · August 28, 2021, 08:33:06 AM

I like it Brad! Nice job!

So far today I've drank coffee, and drank coffee... I seem to be doing something wrong so I'm gonna try again...

B-JS · August 28, 2021, 08:58:03 AM

Glued Up a Strange Prototype today.

Hope IT will come Out the way i want IT.

OldRawhide42 · August 28, 2021, 09:27:29 AM

B-JS how are you putting air in the fire hose ???

Flem · August 28, 2021, 09:33:07 AM

OK guys, we are in the company of a serious bowyer. It's not often you see a gallon kit of EA-40 in the workshop!
[attachment=1]

Mad Max · August 28, 2021, 09:37:06 AM

I can remember any bow you have made

B-JS · August 28, 2021, 09:41:12 AM

Quote from: OldRawhide42 on August 28, 2021, 09:27:29 AM
B-JS how are you putting air in the fire hose ???

With a compressor?
There is a valve on the left Side.

B-JS · August 28, 2021, 09:43:53 AM

Quote from: Flem on August 28, 2021, 09:33:07 AM
OK guys, we are in the company of a serious bowyer. It's not often you see a gallon kit of EA-40 in the workshop!
[attachment=1,msg2974677]

Just got them to show Off....

OldRawhide42 · August 28, 2021, 01:27:02 PM

B-JS maybe I should reword it. How do you put the valve into the hose with the ends of the hose you have on it ??

B-JS · August 28, 2021, 01:46:28 PM

Don't know If you have the same stuff in the States.
That are valves for Alloy Rims.
I Just make a hole in the Hose and screw them in with some washers, before i Close it with the clamp.
No Secret Sauce there.

Flem · August 28, 2021, 02:03:15 PM

Thats slick

Much better looking than the plug arrangement I have seen in other set-ups.

B-JS · August 28, 2021, 02:08:08 PM

I have also other nicer hoses with milled plugs.
But those are used for my fix Forms.
For Prototype Forms, i use the ugly ones.

OldRawhide42 · August 28, 2021, 02:26:12 PM

Thank you. I dont know if we have them but I will find out.