2021 what did you do today?

wood carver 2 · January 18, 2021, 04:50:12 PM

Quote from: kennym on January 18, 2021, 02:23:15 PM
Glued a bow blank to the form somehow . Hammer and chisel time ...

Why would you even admit that? That would be like me getting hit in the head by the 25# pendant on the big crane at work and then telling everyone.
Once my head stops spinning, I look around to make sure nobody saw and get back to work. 😜🤕
Dave.

Roy from Pa · January 18, 2021, 04:51:31 PM

Started another BBO.

[attachment=1,msg2947707]

[attachment=2,msg2947707]

[attachment=3,msg2947707]

[attachment=4,msg2947707]

Mad Max · January 18, 2021, 05:12:23 PM

kennym · January 18, 2021, 05:20:18 PM

Quote from: Roy from Pa on January 18, 2021, 04:51:31 PM
Started another BBO.

[attachment=1,msg2947707]

[attachment=2,msg2947707]

[attachment=3,msg2947707]

[attachment=4,msg2947707]

Better get after it Rody , cold snap comin...

Roy from Pa · January 18, 2021, 05:28:59 PM

Ah crap, don't say that snap word.
LOL

kennym · January 18, 2021, 05:37:31 PM

You're OK I reckon...

Crooked Stic · January 18, 2021, 08:03:48 PM

Kenny should I be checkin my gwass for pin knots.

kennym · January 18, 2021, 08:50:07 PM

Quote from: wood carver 2 on January 18, 2021, 04:50:12 PM
Quote from: kennym on January 18, 2021, 02:23:15 PM
Glued a bow blank to the form somehow . Hammer and chisel time ...
Why would you even admit that? That would be like me getting hit in the head by the 25# pendant on the big crane at work and then telling everyone.
Once my head stops spinning, I look around to make sure nobody saw and get back to work. 😜🤕
Dave.

I got no secrets...

I can screw up with the best!

wood carver 2 · January 18, 2021, 08:55:07 PM

My specialty is making bows that Ulysses couldn't draw..... 🙂🤔
Dave.

ztontonz · January 18, 2021, 09:37:47 PM

Sorry to hear that Kenny. I hope you can save the mold.

Today I measured bows I have. Dfc and chrono:

[attachment=1,msg2947747]

4 point · January 18, 2021, 10:52:15 PM

Glued this up yesterday and squared it up tonight. I stabilized the pieces last summer and just got around to doing something with them now. It's walnut and what I was told was maple but it smelled a lot like cottonwood when I was working it.

EvilDogBeast · January 18, 2021, 11:44:49 PM

Made a new friend on the hard water today....

[attachment=1]

Buemaker · January 19, 2021, 03:30:04 AM

Nice work being done.
Evil i like your new friend, hoping for a fish I guess.

Roy from Pa · January 19, 2021, 08:01:13 AM

Great picture of the Eagle....

Damn those cracks in the ice would bother me...

kennym · January 19, 2021, 08:43:37 AM

Travis, that's awesome!!

Feed that poor bird, Evil ! !!

EvilDogBeast · January 19, 2021, 09:49:48 AM

The cracks had us a little sketched out at first as well. We drilled a test hole before going out and the results were 24" of clear ice thankfully. Still kind of gross to see everything below you though. Don't worry about Mr. Eagle, he didn't really give us much of a choice when it came to getting his fish!

Mad Max · January 19, 2021, 09:56:05 AM

Nice riser 4 point

Flem · January 19, 2021, 10:44:44 AM

Thats one cool looking riser, Travis

Did the Maple feel as lite as Cottonwood?

That ice would sketch me out too

Mark R · January 19, 2021, 11:46:05 AM

24" of clear ice is very strong you can safely drive a car on that, Mr. Eagle might be waiting for left over bait. thats really a nice riser block.

EvilDogBeast · January 19, 2021, 12:07:40 PM

Beautiful riser Travis. It never ceases to amaze me what you guys can produce.