FHLB build Mostly done now!!

Started by kennym, October 22, 2020, 08:02:58 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

kennym

Sorry this is goin slow but I'm rutting... :biglaugh:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

skeaterbait

You dirty old man....  :biglaugh:
Skeater who?

Crooked Stic

Your neck swelled up   :bigsmyl:
High on Archery.

Roy from Pa

His necks bout the only thing that's gonna swell up on him.

Unless he smacks his thumb wif ah hammer:)

Lmfao

Crooked Stic

High on Archery.

kennym

You old dudes have a good sense of humor!!  :laughing:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Roy from Pa

Yup, bout all we got anymore:)

kennym

I'm right there wif ya! LOL

Off work til spring and huntin is gettin good !!
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Roy from Pa

That's awesome Kenny.
Looking forward to pichers of your big buck...

Bvas

Hope your getting better weather than we are!!

Sunny and 77 degree  :banghead:
Some hunt to survive; some survive to hunt

kennym

70 here but Bro has seen 7 bucks cruising today so I'm gettin back out this eve with some sunscreen
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Mad Max

Quote from: kennym on November 08, 2020, 02:39:34 PM
70 here but Bro has seen 7 bucks cruising today so I'm gettin back out this eve with some sunscreen

In your spare time you need to be building a bow :biglaugh: :knothead:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

kennym

#112
Ok nuff complainin !!!

Here's the glue I could break off after wiping it down between the plastic sheets ...

[attachment=1,msg2938227]

Don't forget to transfer the riser centerline to the glass if anything moved cuz you are prob gonna grind it off cleaning glue up, this one was good except for the parallel lam. I saw it while gluing but didn't mess with trying to move it because all else lined up good .

[attachment=2,msg2938227]

Here she is all cleaned up on one side and now to run her thru the thickness sander for the other side.

[attachment=3,msg2938227]

[attachment=4,msg2938227]

Stay sharp, Kenny.

   https://www.kennysarchery.com/

kennym

Must have kept stuff lined up fair, only 1/32" to clean up

[attachment=1]

My lovely assistant got glue on the tape (wait I don't have one in shop ) so i Peeled tape off and retaped so my straightedge doesn't tip and mismark the limb

[attachment=2]

[attachment=3]

Looks pretty good with Bocote ?
Don't mind Lucky , he's a bit mental , especially around cats. Must have had a bad go with one...

[attachment=4]
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Mad Max

I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

kennym

BTW, that pressure strip was in there! LOL You had me thinkin I forgot it... :biglaugh:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Roy from Pa

Looks good ole timer.

Hi Lucky

kennym

#117
Now to lay out limbs , this is a 58" so I mark 29" each way from center of bow . OOPS wrong pic!! Almost laid out a 60"  LOL

[attachment=1,msg2938266]

[attachment=2,msg2938266]
Stay sharp, Kenny.

   https://www.kennysarchery.com/

kennym

Now I've squared across where I marked the 29" from center . No pics sorry.

Mark center at centerline and at 29" marks and stretch a string from nock marks

This one is off a little bit . The tips should be in line with centerline mark.

[attachment=1]

I clamp a piece of mono at each end and check

[attachment=2]

Here I move both tips the same way to bring in line with center

[attachment=4]


Stay sharp, Kenny.

   https://www.kennysarchery.com/

kennym

#119
 :archer2:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©