Split finger tab with a spacer

dhill1520 · August 16, 2020, 02:34:25 PM

I'm looking for a custom split finger tab with a spacer. Does anyone have any suggestions?

Etter · August 16, 2020, 02:41:31 PM

I like the neet calf hair tab. Personally I remove the spacer and really love them when they are really shot in. Great tabs!

Jack Denbow · August 16, 2020, 04:09:20 PM

Bateman has several, I like the cordovan one (TCD).

JD Page · August 19, 2020, 11:37:19 PM

Rick Barbee is the gold standard IMHO, Great guy who stands behind a great tab. Try one, you will not be disappointed.

Steelhead · August 20, 2020, 01:46:29 AM

I have a Cavalier Elite and its a great tab for me.Very well built with some unique features.It cordovan.It lasts forever!

Buckeye1977 · August 20, 2020, 08:47:52 AM

Quote from: Etter on August 16, 2020, 02:41:31 PM
I like the neet calf hair tab. Personally I remove the spacer and really love them when they are really shot in. Great tabs!

My go to for about 20 years!

Sam McMichael · August 20, 2020, 09:19:37 AM

I have used both the Neet and the Bateman and found both of them to be just fine.

Bluefeather · August 20, 2020, 12:23:11 PM

Another Neet user here but I prefer the Super leather,I'm using some that are 20 years old.

GCook · August 21, 2020, 10:52:17 AM

Quote from: JD Page on August 19, 2020, 11:37:19 PM
Rick Barbee is the gold standard IMHO, Great guy who stands behind a great tab. Try one, you will not be disappointed.

I have a gently used large one of these you can try if you like. I just cannot seem to get the hang of a tab.

Wudstix · August 21, 2020, 11:16:17 AM

GCook,
PM sent.

T Sunstone · August 21, 2020, 11:30:54 AM

Another one for the Rick Barbee.

mj seratt · August 22, 2020, 12:48:57 AM

I've been using the Saunders Pak-tab for many years. You can assemble it to your preference. They last forever.

Murray

Etter · August 22, 2020, 05:55:44 AM

Jeez. I gotta try a RB apparently. Hes not taking orders right now though.

Yellah nocks · August 23, 2020, 02:40:30 AM

I now make my own. I but a piece of leather from Hobby Lobby. I think its about 3 or more inches wide by about a foot long. I normally cut pieces to fit and double over after using rubber cement. Then I clamp overnite using two thin pieces of pine trim and squeeze clamps. I cut themto shape using a single edge razor and a metal straightedge. I then drill two holes and insert leather lacing through the holes and controlled by a toggle used for adjusting the length of a cord such as a cinch on a jacket. Just yesterday I started using the leather single thickness at the figertip are but doubled near the base of the fingers. The doubled area allows the toggle and leather lacing to sit firmly. My groups improves and I can now feel my face better for anchor. I dont find a need for a spacer with this set up.