2019 what did ya do today....

Pat B · December 13, 2019, 11:18:28 AM

Couldn't you find a bow in that osage, Clint.
The cherry looks nice. Should make some nice lumber.

Roy from Pa · December 13, 2019, 11:22:59 AM

That's gonna be some sweet wood.

I'm surprised that Husqvarna even cut through it:)

flyonline · December 13, 2019, 06:47:14 PM

Started prepping some turkey feathers for fletching.

Might take a while though

[attachment=1]

Mad Max · December 13, 2019, 06:56:04 PM

Always a nice haul from Clint
I like the snakey stuff

Buemaker · December 15, 2019, 03:28:21 PM

Quote from: Buemaker on December 11, 2019, 08:18:13 AM
Putting a trilam together. Belly european hornbeam, center european walnut, backing hard american maple, powerlam jatoba.
Will be a straight limb one with one inch backset.
All three full length lams have a .003 taper.

Got this one glued up and cleaned on the sides, have not quite decided what I will make of it.

Buemaker · December 15, 2019, 03:30:07 PM

Roy from Pa · December 16, 2019, 05:21:29 PM

Yesterday in the bow shop.

My next bow ready for glue up.

[attachment=1,msg2899625]

Jerry's bow ready for glue up.

[attachment=2,msg2899625]

Jerry working on a grip.

[attachment=3,msg2899625]

Jerry's bow in hot box.

[attachment=4,msg2899625]

Got some splitting to do below on this Ohio Osage.

[attachment=5,msg2899625]

Mad Max · December 16, 2019, 05:55:17 PM

Is that log going to be for you belly slats?
show us how you do it

Roy from Pa · December 16, 2019, 06:02:16 PM

Yup, I will when we do it.

It's 6 feet long but the far end is a little rough.

So I'll take 36 inches off the near end for lams and the other end will be risers.

Forwardhandle · December 16, 2019, 06:08:35 PM

bow loving man · December 16, 2019, 10:20:25 PM

Putting finishing touches on this takedown

ztontonz · December 17, 2019, 01:22:18 AM

Wow that's a pretty sharp looking bow! Do you have more pictures of the bow ?

Bob D · December 17, 2019, 11:12:55 AM

Yes, more pictures. More info. Inquiring minds want to know.

bow loving man · December 17, 2019, 05:06:21 PM

Here's a few more

bow loving man · December 17, 2019, 06:11:18 PM

Purpleheart and maple. 62" 40@28"

bow loving man · December 17, 2019, 06:41:36 PM

Profile

Mad Max · December 17, 2019, 06:47:10 PM

Looking good

bow loving man · December 17, 2019, 09:08:07 PM

Quote from: Bob D on December 17, 2019, 11:12:55 AM
Yes, more pictures. More info. Inquiring minds want to know.

Flem · December 18, 2019, 09:44:11 PM

Thats some spiffy Maple. Looks really nice with the PurpleHeart

ztontonz · December 19, 2019, 01:46:24 PM

Did some progress on the bow. It's only my 3rd bow and the second out of this form. So it is still kind of experimental. It is a very smooth drawing bow, kind of fast too but some what noisy. I think I need to reduce the wedges to get more bend towards the tips.
Here is a picture at 28".
Any thoughts?