3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


GN Quick Detach Quiver with Antler Burrs?

Started by Carcajou, December 15, 2018, 02:44:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Carcajou

A while back someone was running a Great Northern Quick Detach quiver that enabled you to use antler burr take down knobs on a 3 pc TD. I think is was 2 washers sandwiched together with a hole in them, that allowed the quiver wire to seat there, making it easy to tighten the burrs. Not the bracket that comes with the quiver/

Anybody got something similar or a solution That they are running?
" MEMBER ~ COMPTON Traditional Bowhunters "

"Searching through the remnants of my dream-shattered sleep"

bucknut

What you are describing sounds like the original washers before the QD system?  I haven't found a way to use the QD with Burr bolts.  I have 3 or 4 GN's and have one set up for burrs and the others are bolt down with QD so I can swap quivers as needed without taking the bow down. 

John
Whom virtue unites death cannot separate.

cacciatore

This is the point, I asked Bob Brimm to make some longer attachments to accomodate some antler knobs, but brobably the requests are too low. I drilled some bigger holes on the attachments and filed a little bit of material out to lower the rise that interferes with the knob. The other solution is to use the 2 original washers but in this way you have to unstrung the bow for set the quiver.
1993 PBS Regular
Compton
CBA
CSTAS

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©