300gr 2 blade glue in BH's

ozy clint · October 17, 2018, 11:18:12 PM

What is there besides the tuffhead? I have an arrow setup that will be tuned for a 300gr head and while I plan on using the tuffhead I was just wondering what else was available.

jamesh76 · October 17, 2018, 11:49:09 PM

I believe big jim makes some

jamesh76 · October 17, 2018, 11:50:57 PM

Nope, just 250 gr

A Lex · October 18, 2018, 02:13:11 AM

Hey Clint

I've used a 235 grain Grizzly and a 75 grain Woody Weight (for 310 grains) very sucessfully. Might be worth a look.

Best
Lex

Alexander Traditional · October 18, 2018, 08:14:40 AM

VPA has a 2 and 3 blade.

Ron LaClair · October 18, 2018, 01:20:34 PM

200gr Ace Express with 100gr insert adapter

acedoc · October 18, 2018, 01:21:43 PM

Bishop makes some real heavy stuff.

Kopper1013 · October 18, 2018, 01:46:58 PM

If you can afford them

https://www.grizzlystik.com/Ashby-315-Broadheadsbr-3-Pack-P1622.aspx

acedoc · October 18, 2018, 01:53:13 PM

Quote from: Kopper1013 on October 18, 2018, 01:46:58 PM
If you can afford them

https://www.grizzlystik.com/Ashby-315-Broadheadsbr-3-Pack-P1622.aspx
[/quote
Did they get rid of the tendency to chip that was reported by shooters ?

ozy clint · October 18, 2018, 03:38:30 PM

looks like tuffhead is it without having to resort to intermediate adapters/inserts. the bishops are screw in and are ridiculously priced. VPA is screw in too.

acedoc · October 18, 2018, 03:47:35 PM

The bishops go to ridiculously heavy weights too.
But Oz how much foc you need?
You had some very well sorted mini javelins if I recall correctly?

ozy clint · October 18, 2018, 08:30:02 PM

The bishop is still only as strong as the shank. Though for the price they must be valyrian steel.

My custom adapter eliminates the shank from the system. Check out my latest post on the water buff setup on the dangerous game forum for my arrow specs. Just doing some fine tuning at the moment.

WESTBROOK · October 18, 2018, 08:44:53 PM

Clint if your building carbon arrows, these might be of interest....

http://traditionalarcherysolutions.com/shopping.asp

ozy clint · October 18, 2018, 10:46:40 PM

Thanks for the link.
However, since I'm using axis arrows, that adapter doesn't offer any strength advantage over a standard screw in BH since the internal diameter of the axis is the same as the shank of a screw in.

My adapter looks the same only the diameter is the same as the outside of the axis arrow behind the taper. This section is 3/4" long. Then it steps down to the inside diameter of the shaft. A 2020 footing goes over the whole lot to BOP. Adapter weight can be varied by trimming the length of the shank that goes inside the shaft.

acedoc · October 20, 2018, 01:20:56 AM

Here a link to some 195 grain glue on
https://belcherbows.com/products/bacon-buster-broadhead

Longbowlogan · October 20, 2018, 10:39:05 PM

I use a 190gr glue on Cutthroat with a 100gr steel adapter, with glue I'm right around 295gr.

Sent from my SM-G955U using Tapatalk

smag · October 22, 2018, 10:23:58 AM

Woody Weights are way to go. Just take you favorite Ace BH and put a the weight you need to get to 300grns.

nineworlds9 · October 22, 2018, 07:21:34 PM

Valyrian steel you weren't kidding.
I was just on the Bishop site for the first time. Is that supposed to be comedy?

TomMcDonald · October 23, 2018, 07:22:19 PM

Make your own broadheads. Can't be that hard.

ozy clint · October 23, 2018, 10:44:35 PM

I make my own dragon glass BH's.