Recommend a HVLP sprayer

[myshootinstinks]

So far I've been using Tru-oil and rattle cans but want to try an epoxy finish like Fullerplast or Big Jim's Buffalo finish.
  I have a 5hp, 20 gal compressor. What is a good moderately priced spray gun? Also I'll need some kind of line filter I suppose. Advice?

[Roy from Pa]

http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=125;t=014643

[Crittergetter]

I got a Devilbiss 2 gun combo on sale a couple years ago. I have only used the smaller gun . Absolutely no complaints at all!  Just learn to control the flow according to the consistency of whatever finish you are using. Not necessarily cheep but great guns!

[Crooked Stic]

web page  
I have two of these they are outstanding.

[myshootinstinks]

Good info and thanks. Anything special about the line filter I need to get? I've never owned one, be specific. Thanks

[Robertfishes]

If your air compressor uses oil in the compressor then you will need an inline oil filter and moisture filter. If it's an "oil less" compressor then you will need a moisture filter. I live in a high humidity area, I use 2 moisture filters on my oil less compressor. I have a FX1000 mini HVLP spray gun that works pretty good when I set it up right..

[Bow man]

Someone recommended this air dryer a while back and it is working great

http://www.ecompressedair.com/ds20-point-of-use.aspx?utm_source=google_shopping

[myshootinstinks]

Okay guys, I think that clears things up for me.  The compressor is the dual piston, oil lubricated type. Thanks all for the help.