self bow limb twist???

Started by Keb, August 09, 2015, 09:50:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Keb

Got a question, made my 1st oasage self bow 64 nock to nock, cut a shelf in it.

I have a bit of twist in one limb towards the end.

I have only been able to shoot it will a tillering string.

It's about 44 to 46 lbs, @ 28 my draw length.

I shot a 44/50 11/32 wood w/ 125 grain thru paper bullet holes every time.

Will the limb twist matter.

I'm waiting on a string to shot it at some distance past.

Thanks

Pat B

First question, is the limb naturally twisted unbraced or only when the bow is braced. A little bit of natural limb twist is of no concern in a selfbow...but if it twists when braced or as you draw the bow it is because there is a difference in limb thickness from one side to the other.
If that is the case, feel the thickness on either side, one side will probably be thicker than the other. The limb will bend towards the weak side.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Keb

Natural twist bottom limb, can a guy take wood or to even it out?

Or just leave it

Bowjunkie

If it's natural twist and not really bad, I'd let it be.

If I wanted to straighten it some, and it seemed feasible, I would heat it with a heat gun and straighten it, holding it in position with clamps or whatever until it cooled.

I would only remove material from the strong/thick side if it was twisting during the draw like Pat said... due to a difference in thickness from one side to the other.

LittleBen

If is shoots well, and the twist is mild and its natural from the stave ... Let it be. That's what I usually do. Or heat it out as Bowjunkie said.

Pat B

You will see in this pic I have a wedge on the near side to remove some twist from the limb of this bow. I normally don't remove slight twist but this bow went through quite a few heat adjustments. I use veg oil when I make heat corrections with a heat gun.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Keb

Thanks for all the help, it don't look like it will matter, I hope.

Man sure was fun making this lots of elbow grease.

I will have a string wed and let u guys know.

Pat B

Looking forward to seeing your bow, Keb.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Keb

If someone can post my pics I can email them the finished bow pics.

I dont know how to post pics

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©