Is this usable? UPDATE!!

[Kopper1013]

Got this glass from Bingham's
 
This dosent look like the "normal" streaking, these almost look like fishers, what would you do? Unfortunately I got this order over a month and a half ago and never inspected it till today....

[Trux Turning]

No Bueno... From the looks of it.

[Bivyhunter]

Those are cracks, send it back.

[Bowjunkie]

I agree. No good. Call and explain. They should take it back. Let us know what they say.

[JamesV]

The real question here is: How did that piece of glass get out of Gordon's factory and why would Bingham's send it to anyone?

[Kopper1013]

Yea I'm a little disappointed, wonder what would even cause that to happen.

[Robertfishes]

if the glass is bent the wrong way it could crack like that

[mikkekeswick]

Being bent the wrong way.
That's shockingly bad!

[Robertfishes]

mik..bent like if you grabbed both edges and bend it..but thats alot of long cracks in that picture

[Kopper1013]

That's suppose to be the ULS glass to so if it was gonna crack shouldn't it have cracked in both directions?

Anyways, no sense dwelling, I'll order a new piece Monday and talk with them, see if they will do anything. I don't expect much because it has been so long since the original order.

[Mad Max]

Originally posted by JamesV:
The real question here is: How did that piece of glass get out of Gordon's factory and why would Bingham's send it to anyone?

I emailed Binghams a year ago, tapers not the same thickness side to side ( in the 1-1/2" wide part)
checked the tapers every 3 4" not any good either.
Also the prints, the lines not straight where they should be, big wide lines. a plotter would do much better job

sloppy workmanship
I like Binghams, certain things you can get there. If I buy lams I get them over size and grind them myself
 

[Kopper1013]

I called Binghams today and told them what had happened, without question they said they would send out a new piece of glass this afternoon at no cost. I'm very happy with their service today as well as in the past. I know the glass situation is BAD right now but I didn't check my order for a month and a half and they still did the right thing, very great full.

[monterey]

I have had similar good treatment by Bingham.  Have never measured the lamination but they bent just fine.  I'll be checking them from now on though.