Got a favorite bow shooting again (Finished pics)

Started by takefive, September 10, 2014, 02:41:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

takefive

I made a hickory backed elm bow from boards last winter that I really liked, but it started to chrysal in one spot on the top limb.  Finally got around to grinding it down and replacing the elm belly with an osage lam.  It was originally 66" tip to tip, but I cracked the tip overlay on the top limb while stringing it.  So now it's 64" and 47# @ 27".  I glued in 3" of reflex and it holds 1 3/4" at rest, but I've only put 50 arrows thru it.
Hope to finish it this weekend and have a few more pictures to post.

 

 
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

fujimo


takefive

It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Roy from Pa


bigbob2


takefive

It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Pat B

Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Roy from Pa

It's nice Greg. However the edges of the limbs look a little bit square, unless it's just the picture. I round over all the edges of the limbs.

takefive

Thanks Pat.
You're right Roy, they don't look very rounded in the picture.  I think it will show up better in the finished pics.  My daughter's camera gives everything a yellowish tint as well.  The handle is elm but the whole bow looks like osage in the picture.
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

takefive

I've shot a few hundred arrows thru it now and am a happy camper.  This is my favorite shooting bow and it still holds 1 3/4" of reflex.  It's very light in hand, weighs just a hair over 17 ounces.  I put a piece of cherry bark on the back of the handle and cherry bark for the side plate this go round.  









It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

bigbob2


KellyG

That is very nice. The stiching, arrow rest hell the whole handle area are very good (not that the rest of the bow is not)

LittleBen

I really like that one! Always great to save a bow too.

takefive

Thanks for the kind words, guys!  So far so good with the osage belly lam.  For whatever unknown reason, this bow shoots the best for me so I'm keeping my fingers crossed.
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

canopyboy

TGMM Family of the Bow
Professional Bowhunters Society

"The earth has its music for those who will listen." - Santayana

Roy from Pa


takefive

Thanks Canopyboy and Roy.  And thanks for talking up osage so much that I had to give it a try, Roy.  I've managed to chrysal walnut, cherry, and elm and have done better with hard maple and hickory, but osage always comes through.  More than likely it was either my tillering or using a backer that was too strong for those white woods.  Either way, things go better with osage!    :)
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

DesertFox

Hah! Cool! I'd been wondering if you could replace laminations in bows. I wont steal your topic by saying why,

Excellent and inspiring work. The bow looks like it's still a living being.
-How to make a bow-
Step one: Make a pile of shavings.
Step two: Shoot your new bow!

takefive

Thanks DesertFox.  Yeah, replacing the belly lam isn't a really tough project, either.  Good luck on your project!
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©