Swing Jig?

[bowhntineverythingnh03743]

That is exactly what I am looking to do Heartland! Those look amazing!!!

[bowhntineverythingnh03743]

How long of a pivot did you go out to... meaning how many holes did you drill and what is the spacing?

[heartlandbowyer]

Justin I drilled out to 36 inches. These will be take down risers they are 12.5 inches long with a 19 and 13 inch radius.

[bowhntineverythingnh03743]

Oh ok... I can handle making one of these jigs tomorrow! My first bow is going to have an 18 inch riser following Kenny's form. I hope to be in business by next week with ordering all my wood from the master. You guys are all the best an as our spokesman "Ol Fart Roy" says... there is not better community or group of guys as there are here on TG! Truly a blessing to be cyber friends with all of ya...

[Robertfishes]

I have about 20 of those clamps from H.Freight..they work well and seem to be tough.  

[bowhntineverythingnh03743]

So I attempted really hard to make my own version of a swing jig. Hopefully it will work... I am done READ IT... DONE with jig, form, oven, anything of the sort kinda building now!!!

IT IS TIME TO START MY FIRST BOW!!!!

Pictures of my jig






I made the arm of the jig so that I can line the holes up an inch from the blade and also against the blade depending on what the cut will need or where in the blank I want it...

Comments are welcomed... Thanks guys for all the pictures and help to get this thing done! You all are great friends and couldn't even imagine trying to start this craft without you all and without this community on TG/PA!

Justin

[kennym]

COOL !! I have a centerline mark on mine to line up w/ center of riser....

[Roy from Pa]

Looks very well constructed, Justin.

[MoeM]

Usefull- thank u guys!
Just mounted my new bs this evening^^

[kennym]

Originally posted by Roy from Pa:
Looks very well constructed, Justin.

Who are you and what have you done with the real Roy?  

[Roy from Pa]

Ya took yer smart A$$ pill today didn't cha McKenzie?