Single bevel trade point Pic.

Kunzie · October 16, 2012, 08:40:00 PM

First prototype. 200 gr. Blade is 1 1/4" wide and 2 1/2" long. Made from an old 8" circular saw blade. What do you think? Tip to blunt?

Trade point

KHALVERSON · October 16, 2012, 08:58:00 PM

the pic isnt showin on picasa

DEATHMASTER · October 16, 2012, 09:39:00 PM

I do not get a picture.
Sounds nice from the listing.

Kunzie · October 16, 2012, 10:08:00 PM

Forgive me, still learning Hope it works.

http://s32.photobucket.com/albums/d43/jkunzie/?action=view¤t=IMG_0321.jpg

fujimo · October 16, 2012, 10:49:00 PM

looks awesome.
you gonna build some to sell or trade

owlbait · October 16, 2012, 10:54:00 PM

looks good. Time to arrow up and shoot it and give a review. Congratulations on the good work so far.

rmorris · October 17, 2012, 12:22:00 AM

Looks good!

Roy from Pa · October 17, 2012, 07:37:00 AM

Sweet.

inksoup · October 17, 2012, 09:34:00 AM

how did you do it out of "circular saw blade" ?
can you please make build along?

best.

KHALVERSON · October 17, 2012, 05:07:00 PM

looks real good
good lw bevel also

Roy from Pa · October 17, 2012, 08:00:00 PM

Trapper Rob · October 17, 2012, 08:09:00 PM

Looks good how do you cut them out.
Rob

Kunzie · October 17, 2012, 09:47:00 PM

I've never done a build along but have benefited from plenty. So that said I have started taking pictures and in the next two or three days will post it. Thanks Roy for putting the picture up. I need to learn how to do that. Trapper, I cut them out with a high speed, some call it an angle grinder. It is pneumatic. I used a grinding disc to cut them and a sanding disc to pretty them up. I will show later in the build along. Thanks all.