how long to the seats have to be on a take down?

Started by Zradix, August 06, 2011, 11:07:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Zradix

August 06, 2011, 11:07:00 PM
Hi everyone.

I'm planning on making a 3 pc take down.

Just wondering how long the area has to be where the limbs lay or seat to the riser.

Thank you!   :thumbsup:
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

kennym

#1
August 07, 2011, 12:14:00 PM
I go 1" from end of riser to alignment pin, 2" between pin and bolt,and 1" from bolt to end of limb, so mine are 4"
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Zradix

#2
August 07, 2011, 01:14:00 PM
sounds like a plan
Thanks!
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear
Print
Go Up Pages1
User actions
Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©