Will formica work as a pressure strip?

Started by Zradix, March 30, 2011, 05:42:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Zradix

March 30, 2011, 05:42:00 PM
Hi everyone

I'm still working on designing a bow.
Came to the realization that making a form from plywood is too darn expensive for material and tools needed to make it. Much less the added cost and trouble when I find out the first one wasn't designed "quite right" and it needs to change.

So I'm thinking about the 2x4 "posts" at different heights type form.

Anyway.. I'll need a pressure strip for the clamps.
Do you think a strip of formica would work?

Thanks
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

okie64

#1
March 30, 2011, 06:36:00 PM
The idea behind the pressure strip is to even the pressure out between the clamps and formica is pretty flimsy stuff. I would say it would not work very good IMO. You can buy a piece of 1/8"x 2" steel stock at your local hardware store for around 10 or 15 bucks know that it will work.

Robertfishes

#2
March 30, 2011, 06:59:00 PM
The Formica I have seen was thin and flimsy and would not work as a pressure strip.. The galvanized metal pressure strips I got from Binghams are aprox 0.035 inch thick and are cut to standard lamination width sizes, I have 1 3/4" and 1 1/2" wide strips. I put paste wax on them before each use for easy clean up and have had no problems with them. I know some guys use 1/16" or 1/8" thick aluminum strips for pressure strips.
If you plan on making several bows then a nice plywood form would be worth your time, money and effort. Maybe someone near you has one you can borrow??

eflanders

#3
March 30, 2011, 10:53:00 PM
Formica is also somewhat brittle and will crack under the force of a c-clamp.  A strip of 1/16" thick x 1-1/2" wide by 72" long strip of aluminum is about $5 locally.

Zradix

#4
March 30, 2011, 11:04:00 PM
Ok
Thank you for the input everyone.
I really appreciate it!

Take care ...but have lots of fun!
  :thumbsup:
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

T Folts

#5
March 31, 2011, 07:13:00 AM
I'm using 1/8" hardwood for my top pressure strip on a hose pressure system.
US ARMY 1984-1988

monterey

#6
April 02, 2011, 02:32:00 PM
Zradix, not sure where you stand on your knowledge of bow design, but designing right off can be dissapointing.  Not saying it will go that way for you, but it did for me!  :(    I ended up with a 66" long bow with an awful lot of hand shock.  Bow shot ok and all but the hand shock was brutal.

Would be a good idea to check around for some designs compatible with your shooting style and draw length.  Guys on this forum can help with that!  :thumbsup:
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra
Print
Go Up Pages1
User actions
Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©