3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Question/help?

Started by J-dog, February 05, 2007, 11:48:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

J-dog

Am going to order arrows, Gold tips for a schafer silvertip 64" 55#@28".

35/55s or 55/70s??

thinking bout getting one of 3 rivers test kits and see what spine works best, but I have a friend of mine who says the 35/55s are what works, course I think a bow is  like a rifle, they all like to eat something different.

anyway just looking yalls ideas,

Thanks,

Jason
Always be stubborn.

Captain hindsight to the rescue!

kadbow

I'd say you are on the bubble.  I have bows at similar weights.  Those just lighter like the 35/55s some shoot both and some like the 55/75s.  I shoot them all with the 100 gr brass insert up front with 145 gr points.  You may have to try em both.
Colorado Traditional Archers Society
Colorado Bowhunters Association
Grand Mesa Bowmen
Compton Traditional Bowhunters




TGMM Family of the Bow

hunt it

Jason,

How much weight do you shoot up front?? I think you will be fine with the 55/75. If needed you can ad some weight up front to soften them up some. I shoot 250-280grns up front on mine.
hunt it

J-dog

OK I will complicate this, I shoot 150 up front. 130 STOS w/glue in/glue on insert. would a weight tube affect spine? I can see the concept of alot of weight up front "loosening" up the spine but what I am thinking about doing is usig a weight tube to get them up to about 11 gpi. How will a weight tube affect spine?

35-55s are 8.6 grains per inch, 55-70s are 9.3.

With with approximatly 27" weight tube at 8gpi and 150 up front I can get around 606.8 gpi/35-55s, and 626 gpi/55-70s, this is without feathers and nocks.

Main question is how does a weight tube affect spine?

Thanks guys, I am being picky.  :knothead:   I never bought into the weighted arrow and still don't like to stray too heavy up front. But I want to try and get around 11gpi. That should have some pass through power.

Jason
Always be stubborn.

Captain hindsight to the rescue!

Whip

There is another thread here today about the difference between weight tubes versus brass inserts.  I like the brass inserts and the 55-70's fly like darts with 250 grains up front out of 57# @ 29".  The inserts will affect spine.  I haven't used the tubes myself, but I don't think they would.  So the decision of what to use for weight could very well have an impact on which spine shaft to buy.
PBS Regular Member
WTA Life Member
In the end, it is not the years in your life that count. It's the life in your years. Abraham Lincoln.

kadbow

I think you will be surprised at how well a heavily front weighted arrow will fly.
Colorado Traditional Archers Society
Colorado Bowhunters Association
Grand Mesa Bowmen
Compton Traditional Bowhunters




TGMM Family of the Bow

Shawn Leonard

The 55/75 will work for ya and all ya need to do is put in a 100 grain brass insert and shoot your normal head. Ya will need to keep them a tad long like 29.5"s. With your 130 grain head and 43 grain aluminum adapter and the 100 grain insert, you will have 275 up front and that should fly well out of your ST. Shawn
Shawn

J-dog

Thanks guys I am going to try a heavy up front, been kinda stuck in my ways.

Whip thanks, I just found that thread, I went on 3 rivers going to get the brass inserts.

Yall is why this site is so good.

Jason
Always be stubborn.

Captain hindsight to the rescue!

The Whittler

I shoot a BW recurve, 62" 56@29". I shoot 35-55 29.5", 5" or 5.5" 3 feathers. I can shoot the regular insert or the 50gr or 100gr brass insert with 125gr, 145gr, or 175gr points ( I use 125 glue on broad head with 45gr long adapter) and they all fly good. Good luck and have fun. Alan

Gordon martiniuk

I use 3gr"weight tubes the way to go if your spline is ok now why wreak that just add weight tube and instant results no cutting glueing and if you dont like it pull them out  :archer:
Gord

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©