heres my first board bow build

[Scott Beitzel]

not to bad have a little bad bend in the bottom limb    took a hair to much with the band saw .    

thanks,
Scott

[Pat B]

That bow needs to be shot and the next one started. Band saws kill lots of bows so use yours more gingerly the next time.

[Scott Beitzel]

like i said pat it was a first and i kinda got in a hurry but will not be so with the next one cause i know you can't put the wood back  on once it's gone

[George Tsoukalas]

...or not at all. Nice bow.    Jawge

[pappy]

Nice job on your first,Ya I have runied a few on the saw,I don't cut them near as close as I use to.Rough them in and rasp and scraper from then on.Congrats on you first.You might want to make the handle a little shorter on the next,keep all the working limb you can for that draw length.
  Pappy

[Scott Beitzel]

thanks guys  .

am looking for wood as we speak so it's just a matter of finding it.

thanks for looking ,
Scott

[Dano]

Nice first, keep up the good work. I'd get that upper limb bending more like the lower, but hey, build another, boards are cheap.

[Wulomac]

Good looking bow!