hickory backing qestion

Started by Hermann From Bavaria, August 04, 2009, 01:46:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hermann From Bavaria

hey folks.

i want to try a hickory backed white oak. has anyone of you guys experience in use of white oak with hickory? i guess the heartwood would work fine on belly. what do you think?

thanks for tips...
greets
in past even the future was better, so what do you want?

Pat B

Only time I used white oak it was a selfbow and it makes a good bow. A thin hickory backing should work fine. Maple, ash or elm might be a better choice.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Jason Jelinek

I think if you toasted the oak on the belly it would work well.  I've made white oak longbows before and they work, just take a little more set than osage.

Hermann From Bavaria

thanks for feedback guys,
perhaps i should do 2 hick backed bows?
one wiht maple or ash on belly,
and one with toasted oak!
in past even the future was better, so what do you want?

Pat B

Hermann, I was referring to the ash, maple and elm as backing strips. Toasting the oak belly is a good idea also but do it before glue up.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Hermann From Bavaria

but how should i treat the maple, ash, elm strips? can i glue them up with violated rings like hick? or with standing rings?

greets
in past even the future was better, so what do you want?

Pat B

I think biased grain(/////) or flat grain should work. I haven't tried any of the three but I have seen others that have. The hickory should work fine also. That is hat I always used...just not with white oak, I used it successfully with red oak many times.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Hermann From Bavaria

thanks pat. i think its time to try now.

greets
in past even the future was better, so what do you want?

dutchwarbow

Hermann, Hickory is likely to overpower both white oak and maple. Cherry or Black Walnut would be a better choice, but really, hickory is best suited for heavier woods; ipé, massaranduba, osage.

backing lighterwoods is ideally done with, indeed, a lighter wood aswell. Maple and Ash give excelent backings for these woods.

But, why back white oak? as it's very tension strong already. It's smart to back Cherry, B.Walnut, as they're tension weak, but not white oak.

Nick
in the old days religion had it's use to keep nations together. Today, religion tears nations apart.

Nick

Hermann From Bavaria

why white oak? cause i have some hickorybacking strips and tons of white oak. but thank you for your tips. i am not so experienced in wood-backings. i´ve built only selfbows, glas r/d´s, and one try in boo-backing. my thoughts were: now its time to try wood backings. in my opinion it is a very interesting thing for build bows from non-selfbow-suitable woodpieces. -->this means: MORE BOWS!
in past even the future was better, so what do you want?

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©