Just finished a few.

Track · February 13, 2013, 06:38:00 PM

Just finished these knives. Hope the pic comes through.

Track · February 13, 2013, 06:39:00 PM

Oh well, I'll try again when I figure it out.

Track · February 13, 2013, 06:50:00 PM

KHALVERSON · February 13, 2013, 06:57:00 PM

very nice!
i really like the middle one
Kevin

Track · February 13, 2013, 07:16:00 PM

Thanks Kev. That's my favorite too.

L. Harris · February 13, 2013, 07:42:00 PM

Yep! That middle one is nice! As are the other two, I just like the middle ones handle a hair more than the top one.

BowHuntingFool · February 13, 2013, 08:02:00 PM

Very cool, nice work brother!!!!!!

wissler · February 13, 2013, 09:01:00 PM

Very nice.
The middle one screams
They all look sweet though

Lin Rhea · February 14, 2013, 10:50:00 AM

Nice work. What are some specs on the blades?

amar911 · February 14, 2013, 12:15:00 PM

#2 is my favorite too, but I like all of them.

Allan

Track · February 14, 2013, 12:52:00 PM

Thanks much for your great replies, means alot. All the blades are CPM154. Top two blades are 5" long and 5/32" thick. Bottom blade is 6" and 3/16" . I flat ground all the blades from bar stock. I took the ABS forging class in Arkansas several years ago, but haven't gotten a forge set up yet:0( Hopefully soon.

kansas stik man · February 14, 2013, 04:59:00 PM

nice work the middle is my pick, and i went the other way and got a forge instead of a grinder