Anvil stands

[Roughcountry]

What do you guys like for anvil stands? My big chunk of wood is finaly gonna split so I'm looking for ideas. If I use a stump again I'm gonna rawhide it.

[kuch]

many  ways to skin that cat.stump, 6x6 banded together, welded box with sand, etc.

[madness522]

I just built one that has 2 x 4 x 1/4" legs with 1/2" pads and a 12 x 18 x 1" top.  Weighs about 80 pounds and it only cost me like $40 for the steel at the scrap yard.  Plus another well spend $20 for them to cut the top to size.  Now I just need to get it painted.

[Jeremy]

Anvil Stands

[Tique]

Here's a few:  www.anvilfire.com/iForge/tutor/jd_stand/index.htm

I just built one with 2x12s and plywood; works great.

[Roughcountry]

Thanks guys, just what I was looking for. I have two big anvils so I'll most likely have one that won't move and a portable stand.
I have a meatal stand for one that is to high, may be able to cut it down although the bottom is a very large casting.

[Steve Nuckels]

Like Jeremy said!  Anvil Stands   I built Figure #22 stand that I think performs very well.  And I have worked on an anvil using Figure #11.

Steve
--------
Potomac Forge