Sanding Belts

[polarbear]

Looking for a supplier for 1"x30"very fine sanding belts. Any help would appreciated!I've already check most the woodworking cat.Thanks John T.

[beaver#1]

jantz knife supply might have them.

[Wampus]

Trugrit has them up to 1000 grit.

http://www.trugrit.com/belts1.htm

[polarbear]

THANKS GUYS

[bowur]

http://supergrit.com/products/products_belts-blacksc.asp

supergrit has a lot of different sanding belts for pretty cheap

[LC]

I get my belts from Industrial Abrasives indabrasives@msn.com. I use the "everlast"aluminum oxide belts. They always have a special of buy a dozen get a dozen free so for the 2"x72" belts I use they are $47.25 or $1.96 each. You can mix and match grit sizes so I get a dozen 80grit and a dozen 120 grit. I usually get two knifes per belt or by changing the rotation can get a additional one or 3 knives per belt. Just depends on how much grinding I have to do. Their 1"x 30" belts are $20.85 for 24 belts.