Refinish Question

bctgrad · January 24, 2009, 07:55:00 PM

I recently picked up a Browning Nomad Stalker I pretty cheap since it was in fairly rough condition. I thought I would try my hand at refinishing it since I don't have much wrapped up in it and it's not a collector bow. I've got all of the old finish sanded off the limbs and handle and I'm ready to finish it. I was planning to use Tru-Oil. Maybe a stupid question, but should I stain the wood before applying the Tru-Oil or just use the Tru-Oil only.

Horney Toad · January 24, 2009, 08:09:00 PM

I don't think it really matters. If you want the wood to be darker you would stain it. I'm not sure if tru oil would be a good finish for the fiberglass limbs. Some of the experts will weigh in shortly.

bctgrad · January 24, 2009, 08:16:00 PM

Thanks, Jeff. I thought I read in other posts that Tru-Oil was the product of choice for wood & fiberglass. I guess I'll wait to see what others say.

Shaun · January 25, 2009, 08:09:00 AM

Tru oil will work. I have used it on glass bows. Most of the guys who do a lot of this use a two part varnish and spray it on.

TRAP · January 25, 2009, 09:47:00 AM

Tru Oil is a nice finish and easy to apply. Rub it, wipe it, sponge it on, lots of ways to apply it.

It's not as durable as the finishes applied by the pros but works well for the hobbyist refinnisher like me.

Alot of very thin coats are better than thick ones.

I wouldnt stain the bow unless you just want it darker for some reason.

There are quite a few threads in this forum about the use of tru oil. A little research will give you lots of great tips for it's application.

Be patient and have fun,

Trap

d. ward · January 25, 2009, 09:52:00 AM

Tru oil is about the easiest product to use and works great.Its just a little thin and when app.correctly you will need to app.it every 24 hrs for up to 8-10 coats.I would use a scotch-bite pad between coats to smooth up any defects.Tru oil also comes in a spray can and if you use that type you will need to app the same amount of coats and keep them as thin as possible.bd

bctgrad · January 25, 2009, 02:03:00 PM

Thank you all. I'm ready to give it a try. I'll let you know how it comes out.

d. ward · January 25, 2009, 02:49:00 PM

you may want to check the restoration 101 thread some great tip in there for repairing and refinishing old or new bows..bd
http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=14;t=006473