Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Arrow set up for 50# Kohannah Fury

Started by Hersh, September 05, 2007, 08:26:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hersh

I just got my new Kohannah Fury the other day and am wondering what arrow set up I should use. I usually shoot Easton Legacy arrows. With a 52# I used to own, a 2016 with a 145gr. tip worked well. I shot it out of this bow and it seems to porpise up and down a bit. But I dont know if that is from the nock and brace height set up or a weak arrow. The bow is 60" R/D lomgbow. Seems to shoot quiet with a 7" brace height. If another size arrow works better I will use it but am wondering if I need to shorten the arrows I have. Any help would be appreciated. Hersh

sabas silva

Hi Ryan, I shoot a similiar set up, 58" RECURVE (WING hUNTER) 48# @ 27" 145 GRAIN BROADHEAD  ACTUAL ARROW LENGTH CUT AT 28". The porpoise action is usually caused by the nock point height, I beleive that will fix your problem.
Good luck and good hunting
                           sabas silva

Hersh

Thanks a lot. I hope to have some more time to work on it this weekend. Hersh

Bill Turner

Sabas is right about the porpoise action being related to the nocking point. Not knowing your draw length,its differcult to recommend an arrow, but I have had good luck shooting 29" Easton 2018 alum. Legacy shafts out of my 50 to 60 pound  Massie "Longhorns".   :archer:

Hersh

My draw is about 27" or so. The 2016's I shoot are 29 or 29.5 I cant remember right now. Im looking forward to doing more tuning tomorrow. THanks for your help. Hersh

Hersh

Raised the nock point yesterday and got much better arrow flight. Thanks for all your help. Hersh

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©