Goldtips blems ?

Tim Hoeck · January 13, 2018, 05:05:00 PM

Who's has them on sale ? 3555/50

Bigjackfish · January 13, 2018, 05:49:00 PM

Word is that they will no longer be available they have refined their finish process and the blem is a thing of the past

Trenton G. · January 13, 2018, 06:10:00 PM

Oh no! I'll never have new arrows again!

MCS · January 13, 2018, 06:36:00 PM

I was starting to wonder why it was taking so long for them to come out again.

drewsbow · January 13, 2018, 07:42:00 PM

BigJim has some in pink not sure if he has the woodgrain

BigJim · January 25, 2018, 02:25:00 PM

BigJim has a better deal now!...

Beman Center shot's for $69.99 per dz.. NO this is not a limited time thing. Well unless they go up in price on me, but I don't think that is going to happen.

Best value on wood grain shafts. High quality too.

BigJim

drewsbow · January 27, 2018, 02:53:00 PM

I just shot some center shots today and like them.

The Whittler · January 27, 2018, 08:32:00 PM

What length are the Beman Center Shot shafts. Thank you.

JR Williams · January 27, 2018, 09:02:00 PM

The centersbots are different lengths per spine.
340=31.5 in
400=31 in
500=30.71 in
600=30.5 in

Jon Stewart · January 28, 2018, 08:52:00 AM

What spine for 40 bow?

The Whittler · January 28, 2018, 09:42:00 AM

Jon Stewart, I would try the 600 spine.

tracker12 · January 30, 2018, 10:23:00 AM

The Easton aftermath is another great option. Very similar to the center shot but might even be cheaper. I switched to the a couple years ago and been very happy with the results

Longbowcrowder66 · January 30, 2018, 10:42:00 AM

What spine would the Bemans be for #66 to #70? Also I'm not a tech guy when it comes to carbons but are the Bemans shafts the same diameter as Gold Tips? Thanks all..

Rough Run · January 30, 2018, 05:50:00 PM

I think the Centershots are .204 ID skinny shafts, and use a 9/32 point, and the ICS Bowhunters are .246 ID like the GT Trads.

I like the looks of the Centershots, and the price, but I hesitate because it would mean a re-stock of .204 diameter inserts, weights, nocks, etc. and I think also, the use of broadhead adapter rings. And I am also partial to a 4-fletch setup, and I don't know how that would work on a skinny shaft?

dino · January 31, 2018, 04:19:00 AM

The centershot is a .233 ID H nock shaft not a .204 X nock and both use a 9/32 point. They will accept a 4 fletch 5" feather on a .233 ID shaft and a .204 ID shaft also. I do it all of the time with no issue. dino

Frenchymanny · February 02, 2018, 09:29:00 AM

I need to try those centershots!
I might go shopping at BigJim's

F-Manny

indianalongbowshooter · February 04, 2018, 10:30:00 AM

Centershots are great shafts, good value for price.