Thinking g of putting Diamondback skins on high gloss limbs

[Flatshooter]

Ok, I've put snake skins on a few bows in the past but never over high gloss limbs. Question: how much do I have to take down the finish to ensure good contact? Sandpaper or steel wool? Thanks!

[Wheels2]

Have you looked at the limbskins?

[Pat B]

0000 Steel wool or very fine emery cloth should be enough so the glue will adhere.

[Overspined]

I've always used like 100 or 120 grit paper and get down to the glass.  Then I glue the skins and rub finish into them a few coats. spray to "finish"

[Flatshooter]

Thanks guys!

[BAK]

Curious, do you use Titebond for such skins?

[Flatshooter]

yup! As a matter of fact, I just finished gluing the skins down. Going to wait a few days to complete the final trimming and then go to poly. I'm going to try the rub on minwax poly then finish off with the final coat spray.

[Hingefracture]

Would love to see the finished product if you could post some pics!