Got Inspired !

Forwardhandle · February 17, 2019, 04:25:50 PM

With the way time has not been working out for me this winter I decided to put the Horn/composite on hold tell spring & pulled down this stave cut in 2015 been inside for 3 yrs and make a 68" static leaver bow out of it, has a couple of very minor pins but as about as strait as you can get for osage and thick to ,so its one of those staves you can pretty much go where you want with it , this will be a good project to work in the wee hours of the night with out having to use power tools ! Going to get a little more aggresive with induced reflex on this one should be a fun relaxing project !

[attachment=1,msg2852094][attachment=2,msg2852094][attachment=3,msg2852094][attachment=4,msg2852094]

Flem · February 17, 2019, 05:15:36 PM

Nice looking stave

Why you hiding in the bathroom?

Forwardhandle · February 17, 2019, 05:28:59 PM

Because the dust Police women will follow me around with a dust pan and I will get a lecture about banging wood and bows on the walls

Pat B · February 17, 2019, 05:36:33 PM

Looking forward to this. That is a nice stave and the pins seem to be located to be avoided.

Forwardhandle · February 17, 2019, 06:04:35 PM

Yep that lower pin is probably going to end up in center of the fade which shouldnt be a issue and I think the upper one I can avoided its pretty much going to be like my others but going to keep it much wider in the lowers and induce 4 " of reflex hoping to keep 2 of it will see I might put a slow sweeping flip on the tips I need to get it laid out & see what I got ,Im a little rusty self bow making haven't made one in a while but will be fun !

BMorv · February 18, 2019, 10:08:14 AM

Can't wait to see the 1st forward handle osage static lever self bow! FHOSLSB!

Flem · February 18, 2019, 10:29:43 AM

Lever Bow?

ztontonz · February 18, 2019, 10:41:29 AM

Sounds neet. I'll be reading...

Forwardhandle · February 18, 2019, 01:47:10 PM

Flem its just basicly static tiped long bow not calling it a molly because it doesn't fit in terms of front view & tiller profile all I have is construction pics of the last , I left the static tips thick and shot it threw the chrony as I thined them down at the request of a friend it was kinda neat watching it pick up speed as they where thined, these type natural bows are pretty quick if built right ,I think Im going to put a mild sweeping hook on the current one !

[attachment=1][attachment=2][attachment=3]

Flem · February 18, 2019, 02:35:59 PM

Very nice! looks like it cut down the string angle substantially.

Forwardhandle · February 18, 2019, 03:04:55 PM

Yes it does that bow is also 68" pulled to 31" but the problem with using natural material is at long draw lengths your walking a tight rope as far as reflex that bow held reflex but after 3 previous bows of the same design I figured I need a couple design changes one is I'm beefing up the lowers substantialy and I'm going to add the majority of the reflex in the mid limb to outers using a caul similar to the pic if you look carefully in the FD pic I put a slight reflex in the statics right in front of the static fade, this curent one I'm doing a slow sweeping curve in the whole leaver also it's hard to see in those pics but it has a double pyramidal taper on the front view keeping the mass light on mid & upper limb

[attachment=1]

Forwardhandle · February 18, 2019, 03:49:10 PM

Quote from: BMorv on February 18, 2019, 10:08:14 AM
Can't wait to see the 1st forward handle osage static lever self bow! FHOSLSB!

I guess I could glue a overlay on the back