First buildalong ever, silver maple selfbow

Started by talkingcabbage, January 27, 2009, 03:53:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

hova

i would put it on a 2x4 caul to straighten it out and maybe put a little more reflex there.

i have tried some test pieces of silver maple as we have 3 huge ones in the yard , and toasting the belly helped immensly with set. the wood may have been too wet or not seasoned , but it held up fine as long as you dont pull it too far. splinters came up on the edges a lot for me , but i was just using some straight 1/2" sticks about 3' long , just a crude test of the wood since we have so much of it.

and yeah , follow the grain or back it.

-hov
ain't got no gas in it...mmmhmmm...

Pat B

I agree with George about not having a straight center line on a not so straight stave. You should follow the grain with a selfbow layout even if you are planning to sinew it. For maximum durability there are certain rules you adhear to when building selfbows and next to getting a good clean back ring, following the grain(s) is way up there.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

JJB


Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©