Pearson recurve quiver

[The Black Spot]

Pearson spring arm quiver for recurve, these pretty rare? I would like to find one for my stallion.

[SlowBowke]

huh.......I'm no expert by any means but somehow I missed such a beastie exsisted.

Got Pics?

God Bless

[portugeejn]

Do you mean like this?  It could be considered a spring arm quiver, kinda sorta.  The arm hooks go around the bow limb, then it uses a ratcheting system to tighten the quiver up and the arms are kind of springy.

Ron


 

[The Black Spot]

That's it! I never been able to find one, they pretty rare? Do they work well?  Thanks.

[ksbowman]

They pop up every now and then. They are noisy in thier orignal state, but with a little tweeking they will quiet down. The Bear quiver is far superior, but if your wanting one to put on an old Pearson they make the set.

[Bob Gulliksen]

I have one new in the box. Contact me at gulliksen@q.com or 303-637-0817 if you are intrested in it

[The Black Spot]

Bob sent email

[portugeejn]

I had one but sold it on the trader, as I had sold the bow that it went with.  

They do come up on the site that shall not be named from time to time.  I have seen them on the trader a couple times also in the last couple years.

I found mine was a bit noisy if the bars were not spread far enough apart to actually bend them a bit with the tension.  And it would hold 11/16 wood just fine, but the 5/16 aluminum was a bit looser than I like.

RonP

[bloodyarrow]

I have sevarl and like ksbowman said they are noisey i just added some foam on the hood and it dose the trick

[The Black Spot]

thanks for the advice on quietness. i just recieved mine from Bob Gulliksen. he ships fast! this quiver is in excellent condition and looks great on my pearson stallion!
i can email pics if someone wants to post them on the forum.

[The Black Spot]

Bloodyarrow you said you added foam ON the hood? I put some inside, but I still get a little bit of rattle.. is it the hood that rattles or the silver piece that locks in the ratchet system? Thanks.

[bloodyarrow]

Your foam needs to be a rather dense foam i tried regular foam the first time and it did not do much but come up with some dense and it worked great. I have had the rachet rattle but have had it come lose. you can add a little extra padding under the rachet and that will help also

[bloodyarrow]

Another thing to look at is your rivets that attach everything make sure they are tight if not all you have to do is use a punch and a hard object on the head side and tap the punch and it will tighten everything back up