Making a copy of the bear Kodiak help needed

[Cody Roiter]

Hello Guys, I have every I need to make a copy of the Kodiak I would like to make the 1960s. After some time last night I found out that my bow form I  picked up from a older friend was made into the shape of the Kodiak or so I was told. I have every thing I need even the bear glass that was used on these bows in the 1960s. But I would like to know how long the riser is and how tall. ( if some one could add pics that would be great) Also what woods they were  made out of. My core wood I change from maple to bambbo.      

Thanks for the help guys.
Cody

[kurtbel5]

Hi Cody
Try Chad at Holmade bows, He can give you some measurements.
He's a really nice guy to deal with and does a Kodiak repro. He can give you some great pointers.
        Good luck
         Kurt

[Bjorn]

Cody, there were 3 riser lengths for the 3 different bows: 56" 60" and 64". The riser featers into the limb making the length a bit subjective, especially for an exact measurement. Let me know what length of bow you are making, and I will take pics and measurements for you.
Take lots of pics and make notes as you work on this it is a great project.

[d. ward]

Hi Cody if there are any certin things I can help with I would be more then happy.If it would be possible for you to load a couple pics of the glass.We may be able figure out what year Bear bows it was for and give you the correct measurments for that year and model..bowdoc