KME Broadhead Sharpener

[Bill Howland]

I just saw an add for this sharpener in the Arrow Trade magazine I get and thought I'd probably let you guys know about it.

 http://www.kmesharp.com/Products.html  

   http://us.st11.yimg.com/us.st.yimg.com/I/yhst-40224423169460_1936_182504

Looks like a pretty good setup....And you can do your Grizzly Heads TOO!

[BigRonHuntAlot]

Thanks Bill, BTW are you working on my bow yet, LOL Just kidding I see the X by my name      

[Bill Howland]

Yup, sure am! Cut and ground your cores and started your riser toady.

[BigRonHuntAlot]

   Looking forward to her...

[bjk]

It's an awesome bh sharpener...wait till June when they come out with the knife sharpener...both are the most thought out sharpening system going...keep an eye out.

[Bill Howland]

Maybe this should go as a product review, but heck, I'm a bow buildernot a computer guy.

I got myself one of these KME Broadhead Sharpeners and I'm here to tell you, if you use a two blade broadhead...This thing is a must!

I took the dullest most bent up (from the MFR) that I had and put it into the KME Broadhead Sharpener and started with 220 grit wet paper and in about 50 strokes the edge was profiled. I then changed paper to 400 grit, 600 grit, then jumped to 1500 grit and finished with 2000 grit. And now she's scary sharp!  

[donw]

the best b'head sharpener i've ever owned.

[canadian]

Will it work on Simmons heads?

[Charlie Lamb]

Canadian... it probably won't work on the Simmons.  Maybe if you had a half round stone. The curved blade of the Simmons would give you a problem on a flat stone.

[East Coast archer]

I agree with all above, I picked one up at the Whittingham shoot and it works great.  I got the combination stone and fine stone with it.  First I sharpened an Eclipse.  I got it sharper then I could with a file in less time.  Then I tried it on a grizzly and got the whole blade sharper then I ever could with a file and with less labor.