Arrow Saw - Looking for good blades

[JDinPA]

I bought this cheap little cut-off saw at HF for cutting arrows. It works great but the blade is already dull after cutting about three dozen arrows.
 http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=42307  

Anybody have any recommendations on some good replacement blades for the saw? I don't want to keep buying the crappy blades. The blades are 2".

Thanks,
JD

[varmint]

I have the same one,I'd be interested to know also.....

[BMOELLER]

Me too

[WESTBROOK]

The closest thing I could find was at McMaster-Carr, 2" miniature blade but only a 1/8" arbor. And it was $20.

Checked Grainger and Grizzly...NADA

Eric

[wapiti]

Check welding shops for abrasive wheels. Abrasive is the way to go. They may only have them down to 3" though. Thats what I use on my arrow saw. They are heavier blades and seem to last longer than the original abrasives. I use a saw I bought from FS arrows 25 years ago. I cut evrything from woodies to carbons with the abrasive wheel.

[TimZeigler]

the auction site has them, I use the 2" abrasive cutoff wheels with the 3/8" arbor.  Harborfreight used to carry them but I don't see them listed anymore, just the saw and the metal blade.

[JDinPA]

T,
Thanks I'll look for them.
JD

[JDinPA]

Here's what I'm trying:
http://cgi.****.com/ws/eBayISAPI.dll?ViewItem&item=170084415132

[aYak]

JD,
Awhile back, I purchased a number of those, from that same seller, he sells both NEW and used ones. He's been a good supplier for me, and those do seem to work well.
best regards

[RamiusEng]

I use wood arrows....
So my 15 year old Exacto Mitre saw works great!....