cutting diamiter

[hibracehite]

i know that woodsman broadheads re advertised at one inch in diamiter and razor caps are advertised at an inch and an eighth but when i put the two together back to back the blades match up edge to edge. am i missing something or is one of the two heads noth advertised at thier correct diamiter.

[hibracehite]

ttt

[SlowBowinMO]

I've had some Woodsmans that were a little bigger than advertised before.  I've personally never seen a Razorcap that wasn't dead on, I'm betting you've got some slightly oversized Woodies.  Even if exact it's still only 1/16 of an inch per blade, not a lot of fudge room between them.