Print Page - Nock adhesive for carbons?

Title: Nock adhesive for carbons?
Post by: brmize on July 30, 2007, 08:22:00 PM

I have a set of goldtip trads that I had made and the nocks keep pulling out. What would be the best glue/adhesive to keep them in?

Thanks,
Brian

Title: Re: Nock adhesive for carbons?
Post by: Pete W on July 30, 2007, 08:27:00 PM

Your serving is to thick or the nock is worn out.
They are push in nocks and don't get glued in.

Title: Re: Nock adhesive for carbons?
Post by: swampbuck on July 30, 2007, 08:29:00 PM

The guys at the local archery shop here told me to use gorrila glue.Clean out the inside of the shaft with water and a Q-tip and put the glue on the insert.Water is the activation agent and I've yet to have an insert come out.The down side is I used to use hot melt and could get the insert out if I wanted....becareful not to heat the shaft if you use hot melt... good luck

Title: Re: Nock adhesive for carbons?
Post by: swampbuck on July 30, 2007, 08:30:00 PM

oop's my bad you said "nock adhesive" sorry...LOL

I don't glue my nocks they stay put just fine

Title: Re: Nock adhesive for carbons?
Post by: Shawn Leonard on July 30, 2007, 08:31:00 PM

Ya can use super glue, but ya should try new nocks first. Shawn

Title: Re: Nock adhesive for carbons?
Post by: brmize on July 30, 2007, 08:58:00 PM

Thanks Guys.

Brian

Trad Gang

Main Boards => PowWow => Topic started by: brmize on July 30, 2007, 08:22:00 PM