I have a 51@27 Blackwidow MA2 (1999 FF limbs) Dyna97, and it shoots 28" carbon express maxima 250's w/200gr points perfect (28" PSE dominator 200's & 250gr points & 28" CX 200's (old) also w/ 250 gr points)
where would you guys start with a wood spine here??? I prefer not to have a arrow longer than 28.5" cause I don't want to see the tip.
thanks Ted
thanks for any info.. Ted
28" 65-70s with 125 grain point. Shawn
I second that one
Shawn, It seems you are the arrow guru. What size GT shaft would you recommend for a BW PLV 50@28 drawing 27" I want a heavy shaft in weight.
Howard
I am not crazy about GTs but a 35/55 with 50 grain brass insert and 125 grain head would fly well for ya, cut to 28.5"s. Ya could also go with a Heritage 150 cut to 28.5"s with 100 grain brass insert and 125-150 grain head, ya may have to experiment a tad with point weight.
I think Shawn is nuts on with the woodie recommendation but I would start at 28.5" it's alot easier to cut 1/2" than to stretch that shaft 1/2" longer.
Shawn I would say is dead nuts on the shaft recommendation. You add 10 pounds for fast flight and 3 pound per inch of arrow over 26" so that would put you for a 28" arrow at 67 pounds. Good call Shawn!!
shawn seems your the guy that called it,,, okay I'll get some finished shafts and see how they fly --> thanks Ted
I agree with Shawn, 65-70 is what I shoot from my bow 53#@26" 27"BOP 160grn points