Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: jlnft on January 10, 2007, 09:43:00 PM

Title: Cedar, Douglas Fir, and White Birch Arrows
Post by: jlnft on January 10, 2007, 09:43:00 PM
Just a heads up! I just put a few dozen arrows on the Sponsors Classifieds. If you would? Give me the good and bad(I can take it.....I think.....maybe!). I've been working on a few things.

Thanks,
Joe
Title: Re: Cedar, Douglas Fir, and White Birch Arrows
Post by: Ringneck on January 10, 2007, 10:39:00 PM
Joe, those are some beautiful arrows! Wow!!

Shawn
Title: Re: Cedar, Douglas Fir, and White Birch Arrows
Post by: Shaun on January 10, 2007, 11:08:00 PM
Joe, those are some fine arrows. PM'd you about the fir ones. You might want to add finished weight of arrows to your descriptions. Keep up the good work.
Title: Re: Cedar, Douglas Fir, and White Birch Arrows
Post by: Hot Hap on January 11, 2007, 02:40:00 AM
Beautiful!
Title: Re: Cedar, Douglas Fir, and White Birch Arrows
Post by: Al Dean on January 11, 2007, 07:26:00 AM
I always put my nock with the edge grain, 90 degrees off from yours.  Do you spine each shaft to be able to put the nocks as you do?
Title: Re: Cedar, Douglas Fir, and White Birch Arrows
Post by: jlnft on January 11, 2007, 09:00:00 AM
Al,

I've probably had about a 75%/25% split on the "edge grain" nock alignment. I usually go with the 75%, but if I'm building some arrows for someone I always ask how they would like the nock aligned. I do spine each shaft in the same area of rotation(grain). I think that gives me a good, consistant, nock to spine alignment.

Thanks,
Joe
Title: Re: Cedar, Douglas Fir, and White Birch Arrows
Post by: jlnft on January 11, 2007, 10:49:00 AM
I just put one more set on the Sponsors Classifieds.

They're a little louder than usual!

Thanks,
Joe
Text only | Text with Images