Print Page - Harbor Freight Mini Cut-Off Saw .. need Arrow Jig ideas!!

Title: Harbor Freight Mini Cut-Off Saw .. need Arrow Jig ideas!!
Post by: Yankee Bill on June 02, 2007, 07:33:00 AM

Hi Folk's,

After reading the many possitive reviews about them, I just purchased one of the Mini Cut-Off Saws from Harbor Freight to use as an Arrow Saw.

I'm looking for some ideas for a Jig for this purpose. I've heard several people mention that they've made some in the past and was wondering if Y'all wouldn't mind sharing some pic's if ya have any.

Thanks,

YB

Title: Re: Harbor Freight Mini Cut-Off Saw .. need Arrow Jig ideas!!
Post by: flounder pounder on June 02, 2007, 10:46:00 AM

I have the same saw and it works great. I put the shaft in the vise and let it rest on the raised portion of the vise. Tighten the vise on the shaft and go slow as you cut through it or it will splinter on the ends.

Title: Re: Harbor Freight Mini Cut-Off Saw .. need Arrow Jig ideas!!
Post by: Yankee Bill on June 04, 2007, 08:54:00 AM

Thanks Flounder Pounder, appreciate the info.

Anyone else out there that can share some input or pics on their Arra Cutting Jig / set-up.

Appreciate any info you may have.

Many Thanks,

YB

Title: Re: Harbor Freight Mini Cut-Off Saw .. need Arrow Jig ideas!!
Post by: Barney on June 04, 2007, 03:34:00 PM

Sent you a PM

Title: Re: Harbor Freight Mini Cut-Off Saw .. need Arrow Jig ideas!!
Post by: Yankee Bill on June 04, 2007, 04:27:00 PM

Thanks Barney, PM back attchya :)

YB

Trad Gang

Main Boards => PowWow => Topic started by: Yankee Bill on June 02, 2007, 07:33:00 AM