Title: how do you remove brass string nocks?
Post by: Ian johnson on May 12, 2007, 06:28:00 PM
Post by: Ian johnson on May 12, 2007, 06:28:00 PM
how do you remove the brass string nocks?, do I have to buy a set of nock pliers?, or can I use something else?
Title: Re: how do you remove brass string nocks?
Post by: LUCKY MAN on May 12, 2007, 07:00:00 PM
Post by: LUCKY MAN on May 12, 2007, 07:00:00 PM
Finger nail clippers will work.
Title: Re: how do you remove brass string nocks?
Post by: Ian johnson on May 12, 2007, 07:56:00 PM
Post by: Ian johnson on May 12, 2007, 07:56:00 PM
how?
Title: Re: how do you remove brass string nocks?
Post by: Killdeer on May 12, 2007, 08:00:00 PM
Post by: Killdeer on May 12, 2007, 08:00:00 PM
Never tried fingernail clippers. Hmmm...do I sever the string above or below the nock? :confused: ;)
I HATE brass string nocks! I usually work them over with two pairs of pliers until they give up the ghost. I will see if I can develop a fingernail clipper technique. Might as well use them for something, seeing as I have no fingernails! :D
Killdeer
I HATE brass string nocks! I usually work them over with two pairs of pliers until they give up the ghost. I will see if I can develop a fingernail clipper technique. Might as well use them for something, seeing as I have no fingernails! :D
Killdeer
Title: Re: how do you remove brass string nocks?
Post by: Java Man on May 12, 2007, 08:00:00 PM
Post by: Java Man on May 12, 2007, 08:00:00 PM
I spread the open end with the blade of a screwdriver by twisting it open.
Title: Re: how do you remove brass string nocks?
Post by: Dano on May 12, 2007, 08:25:00 PM
Post by: Dano on May 12, 2007, 08:25:00 PM
My gosh ya'all, get a pair of nock pliers their cheep. !["[dntthnk]"]("graemlins/dntthnk.gif" "\"\"")
:rolleyes:
:rolleyes:
Title: Re: how do you remove brass string nocks?
Post by: OconeeDan on May 12, 2007, 08:33:00 PM
Post by: OconeeDan on May 12, 2007, 08:33:00 PM
DON'T use a little cutoff wheel in a dremel tool! :scared:
Ask me how I know. I was very careful not to nick the string, but the heat got to it.
From then on, it's dental thread for my nocking points.
Dan
Ask me how I know. I was very careful not to nick the string, but the heat got to it.
From then on, it's dental thread for my nocking points.
Dan
Title: Re: how do you remove brass string nocks?
Post by: Chris Wilson on May 12, 2007, 10:14:00 PM
Post by: Chris Wilson on May 12, 2007, 10:14:00 PM
Get a Tru-fire universal crimpint tool. A little more expensive, but worth every penny.
http://www.lancasterarchery.com/shop/product_info.php?cPath=46_213&products_id=2106
http://www.lancasterarchery.com/shop/product_info.php?cPath=46_213&products_id=2106
Title: Re: how do you remove brass string nocks?
Post by: Aeronut on May 12, 2007, 10:23:00 PM
Post by: Aeronut on May 12, 2007, 10:23:00 PM
I somehow wound up with two pairs of the crimping pliers and I hate brass nocks. I usually just used two pairs of regular pliers and pulled them apart.
Dennis
Dennis
Title: Re: how do you remove brass string nocks?
Post by: **DONOTDELETE** on May 12, 2007, 11:10:00 PM
Post by: **DONOTDELETE** on May 12, 2007, 11:10:00 PM
I love brass nocks myself! Crimp them down slightly and you can spin them up or down while you are shooting and adjusting the height, then crimp it down all the way and they usually stay putt pretty good. To remove them is easy with the right tool....about $3.00 i belive will buy you a set of nock pliers.... I must admitt...not having a set would make things a bit more difficult....kinda like doing a brake job with regular pliers And a screw driver and no brake tools.....it CAN be done.....But why???????
Title: Re: how do you remove brass string nocks?
Post by: Ian johnson on May 12, 2007, 11:12:00 PM
Post by: Ian johnson on May 12, 2007, 11:12:00 PM
thanks, I added a set of nock pliers to my basket of arrow supplies that I just ordered
Title: Re: how do you remove brass string nocks?
Post by: Jason R. Wesbrock on May 13, 2007, 12:22:00 AM
Post by: Jason R. Wesbrock on May 13, 2007, 12:22:00 AM
QuoteOriginally posted by Chris Wilson:Definately well worth the few extra dollars.
Get a Tru-fire universal crimpint tool. A little more expensive, but worth every penny.
http://www.lancasterarchery.com/shop/product_info.php?cPath=46_213&products_id=2106
Title: Re: how do you remove brass string nocks?
Post by: FJTOYMAN on May 13, 2007, 03:30:00 AM
Post by: FJTOYMAN on May 13, 2007, 03:30:00 AM
QuoteOriginally posted by Chris Wilson:2nd
Get a Tru-fire universal crimpint tool. A little more expensive, but worth every penny.
http://www.lancasterarchery.com/shop/product_info.php?cPath=46_213&products_id=2106
Title: Re: how do you remove brass string nocks?
Post by: bayoulongbowman on May 13, 2007, 10:19:00 AM
Post by: bayoulongbowman on May 13, 2007, 10:19:00 AM
me too...Im with Chris..crimp tool.. :)
Title: Re: how do you remove brass string nocks?
Post by: wtpops on May 13, 2007, 01:33:00 PM
Post by: wtpops on May 13, 2007, 01:33:00 PM
Very carfully. I just cut the string on my Widow in half. Needless to say it scared the #%$#@ out of me when it gave way and the bow jumped out of my lap.
Going to order that tool listed above as soon as i post this.
Going to order that tool listed above as soon as i post this.
Title: Re: how do you remove brass string nocks?
Post by: LBR on May 13, 2007, 05:03:00 PM
Post by: LBR on May 13, 2007, 05:03:00 PM
Not sure of the name, but I got a set of nock pliers from Lone Wolf that has a very simple and effective remover built in. Probably the same one mentioned above--works great, definately worth the money.
I switch between tied on nocks and brass. Brass is just too quick and convenient for me to give up.
Chad
I switch between tied on nocks and brass. Brass is just too quick and convenient for me to give up.
Chad
Title: Re: how do you remove brass string nocks?
Post by: UKarcher on May 13, 2007, 07:22:00 PM
Post by: UKarcher on May 13, 2007, 07:22:00 PM
I have one brass nock in my tool kit. I use it to tune in my bow, then when I've found the spot, it goes straight back in the toolbox with the crimping pliers and I use dental floss or serving thread for my permanent nock. Nothing cuts up a glove or tab like a brass nock.
Graham
Graham