Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: ZaneD on April 24, 2007, 02:51:00 PM

Title: What size alimunum shaft for..
Post by: ZaneD on April 24, 2007, 02:51:00 PM
what size aluminum shaft can i use to foot a easton st excel in the 500 spine? this arrow is a size kinda between an axis and a regular 5/16 carbon.
Title: Re: What size alimunum shaft for..
Post by: ZaneD on April 24, 2007, 04:42:00 PM
ttt
Title: Re: What size alimunum shaft for..
Post by: Bill Carlsen on April 24, 2007, 05:24:00 PM
I use 2020's on  my wife's 500 Beman MFX shafts. A 2018 may also work. If it is a little loose put them on with Gorilla glue, which expands when it cures.
Title: Re: What size alimunum shaft for..
Post by: JRY309 on April 24, 2007, 07:21:00 PM
I believe the easton  st excel 500 is 9/32 diameter.I the easton catalog they list Axis obession 300 at 9/32 and a 2013 fit it great.Now on my Beman black Max 300 took a 2016 for a good fit.Like Bill uses a 2020 fit on my Beman  MFX classic 500 great.I would be looking to try a 2013 or a 2016 to see if they fit on the excel st 500.I know they are right between axis/mfx and the older model excel's because they take a different nock and insert.
Title: Re: What size alimunum shaft for..
Post by: ZaneD on April 24, 2007, 08:59:00 PM
i have tried a 2018, and it is just a tiny bit too big.
Text only | Text with Images