I have recently received my first recurve, a Chekmate Falcon with a chechen riser and elm limbs, with a draw weight of #45 at 27.5. With this being my first trad bow I'm having trouble with arrow selection.
I'm looking at the CE Heritage 150 with a shaft length of approximately 29 to 30 inches with a 125 grain head and 100 grains of point weight. Does this sound like a reasonable starting point or would the Heritage 250 be a better choice.
Thanks for the help.
EWW
150s start full length and cut down from the nock end 1/4" at a time until you get good bare shaft flight. Then fletch a couple up and see where they land in comparison. 250s would be way to stiff.
definitely go with the 150's, I wish I would have. check out OL Adcock's tuning method for tuning.
As stated above the 250's will be way too stiff. stick with the 150's and do like Vermonster says.