Print Page - broadhead taper angle?

Title: broadhead taper angle?
Post by: 44charlie on April 18, 2007, 04:54:00 PM

is it 10 degrees or 11.5 degrees?
thanks for your help.

charlie

Title: Re: broadhead taper angle?
Post by: BernieH on April 18, 2007, 05:26:00 PM

5 degrees.
the nock taper is 11.5 degrees

Title: Re: broadhead taper angle?
Post by: Orion on April 18, 2007, 09:18:00 PM

I believe the nock taper is 11 degrees. At least that's what T.J Conrads says in his Traditional Bowhunters Handbook. But not a problem unless you make your own tapering jigs because all commercial jigs and components have the 11 degree taper.

Title: Re: broadhead taper angle?
Post by: Falk on April 19, 2007, 07:20:00 AM

Bernie is correct here.
The nock taper is 11.5° (+/- 0.25°) per AMO-Standard.

Trad Gang

Main Boards => PowWow => Topic started by: 44charlie on April 18, 2007, 04:54:00 PM