I was asked by a friend to make a replica arrow for is den. I was at the WI deer and turkey expo last weekend and picked up some chert stone flakes that will work great for this project.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert1.jpg)
I used a nice, thin, white piece for the arrowhead.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert2.jpg)
I made some wood and cooper tools and an antler brow tine to flake away the stone. The leather is to protect my hand as I press the coper tool against the chert. The flakes are sharp.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert3.jpg)
I started by squaring off the bottom of the flake and then chipped the head to shape.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert4.jpg)
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert5.jpg)
Lastly I added the grooves to each side that will be used to tie the head to the shaft. This is where I make the most mistakes and break the head.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert6.jpg)
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert7.jpg)
Next, I used a knife to cut a groove in the end of a wood shaft to accept the stone head.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert8.jpg)
I will trim away the extra wood after I tie the head on.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert9.jpg)
To tie the head to the shaft, I use the sinew I save from the loins/backstraps from my deer.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert91.jpg)
It separates into nice thin threads.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert92.jpg)
I soaked the sinew threads in cold water to soften and stretch them. While waiting, I stained the wood shaft. The sinew does not really get tied onto the shaft. It is more like wrapping a wet noodle around the shaft. After I put on a few layers, I dried it with a blow dryer (just like I'm sure the early people did). This makes it shrink tight. I then rub the sinew with a block of bees wax to waterproof it so it won't get wet and loosen up.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert93.jpg)
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert94.jpg)
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert95.jpg)
For the fletching, I went back to the turkey feathers and tied them on.
(http://i28.photobucket.com/albums/c239/212007154/arrows/chert96.jpg)
Wow-Wish I had that kind of ability. Hap
Nice! Your friend will be pleased.
Awesome work!!! :thumbsup:
nice
hey real cool bro :thumbsup:
Very nice :0)
very cool bro.
RGK, nice work! What did you use to make the copper tools? I would really like to get started in flintknapping.. John
Nice job. I would love to learn how to do that.
Nice work
Your photos made it seem like it just happened along like magic. Nice.
I used heavy gauge copper wire and brass rods to make the tools.
QuoteOriginally posted by possumtrot:
RGK, nice work! What did you use to make the copper tools? I would really like to get started in flintknapping.. John
Thanks. Did you drill holes in the wooden handles to get the copper and brass in? What gauge wire would you suggest? #6 or so?
I drilled holes and used epoxy to hold the wires in. I think I used rods from 1/4 inch and down in size.