Anyone know a link to a template for a 3 fingers under tab?
Thanks (ahead of time)
I can send you one if you like. I could scan and make an attachment to a Email!
Larry – I would be so very, very, much obliged...THANK YOU!!!
gary.czatt@windstream.com
Hey, 3under... could I get in on that? I made mine but I know a better one could be done and I'd love to see what you came up with.
My email is rwightman@mindspring.com
and I'll be happy to respond to both of you with a tracing of the one I did.
dick in seattle
I make mine large and trim away everything "extra" with sharp scissors. I used an old tab to get the hole size close and customized from there. 5 minutes. Cordovan.
I would like a copy of the template as well if it isn't too much trouble. Thank you.
bpayne@aguirreandpatterson.com
It would be fine if someone can post the template.
Thanks
Martin
It's been so long I forgot how to add from Photobucket!(Early onset of old timer's)Here goes.
(http://img.photobucket.com/albums/v288/dalzell/3UnderTab.jpg)
I make my finger holes so they will fit tight over leather gloves for hunting. Size holes to fit!
Thanks 3Under!!!
Hey three under. I have never seen a tab with two finger holes, I just modified a split finger tab. Are two finger tabs like this in the picture the norm? Thanks for the picture, I am going to try to make one from standard leather.
Is the picture a right hand or left hand tab?
Larry - THANX MUCH!!!