Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: CMR on March 30, 2007, 08:33:00 AM

Title: Which size adapter for "green" Razorhead?
Post by: CMR on March 30, 2007, 08:33:00 AM
Which size short adapter do ya use w/the "green" Razorhead?
5/16 or 11/32?
Thanks in advance!
Title: Re: Which size adapter for "green" Razorhead?
Post by: Golden Hawk on March 30, 2007, 08:59:00 AM
I belive they take the 11/32".
Title: Re: Which size adapter for "green" Razorhead?
Post by: CMR on March 30, 2007, 09:20:00 AM
Thats what I thought but in another thread someone posted about the Razorhead, someone stated 5/16.
Title: Re: Which size adapter for "green" Razorhead?
Post by: woodchucker on March 30, 2007, 09:41:00 AM
A 5/16" will set deeper into the ferrule and some folks think this make allignment better.I can't say for sure,I haven't had any problems with the 11/32"

For smaller diameter shafts like 2018's,2016's,1916's or carbons,you could use a 5/16" but for thicker shafts like 2117's,2216's, you will need to use the 11/32" or the insert will not butt up against the shaft.
Title: Re: Which size adapter for "green" Razorhead?
Post by: SCATTERSHOT on March 30, 2007, 12:10:00 PM
If you are going to use the bleeder blades, you will need the 11/32" short adapter.
Text only | Text with Images