Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: **DONOTDELETE** on March 28, 2007, 06:02:00 PM

Title: Inserts
Post by: **DONOTDELETE** on March 28, 2007, 06:02:00 PM
Just wondering how you guys install the inserts in your carbon shafts. Justin
Title: Re: Inserts
Post by: DesertDude on March 28, 2007, 07:20:00 PM
I lightly sand the inside. clean with a Q-Tip and acetone. then ruff up and clean the insert the same way.  glue with 2 part (24HR) epoxy.

Hope this helps.........Mark
Title: Re: Inserts
Post by: **DONOTDELETE** on March 28, 2007, 08:47:00 PM
Thanks Mark, Justin
Title: Re: Inserts
Post by: mark land on March 29, 2007, 09:50:00 AM
I use a 243 bore brush and then alcohol and Q-tip, works very well and epoxy seems to hold good.  Mark
Text only | Text with Images