Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Crooked Stic on March 17, 2007, 03:42:00 PM

Title: Fuller -Plast users
Post by: Crooked Stic on March 17, 2007, 03:42:00 PM
Can you get too much catalyst in the mix. If so what would the effects be?
Title: Re: Fuller -Plast users
Post by: Kevin Breaux on March 17, 2007, 05:08:00 PM
As the directions read, it would harden faster.
Title: Re: Fuller -Plast users
Post by: Peckerwood on March 17, 2007, 06:19:00 PM
I have found that if you use to much catalyst the finish has a tendency to crack on the working part of the limbs and will chip easier. This cracking can also be caused by applying to much finish to the limbs.
Bill
Title: Re: Fuller -Plast users
Post by: Crooked Stic on March 17, 2007, 06:42:00 PM
I am thinking I am going back to T-bird.
Title: Re: Fuller -Plast users
Post by: sidebuster on March 17, 2007, 07:47:00 PM
Never had a problem. Just follow the mixing instructions exactly as shown.
Title: Re: Fuller -Plast users
Post by: sidebuster on March 17, 2007, 07:49:00 PM
Never had a problem.  Just follow the instructions exactly as described.
Title: Re: Fuller -Plast users
Post by: Jim Neaves on March 17, 2007, 09:35:00 PM
Just add 1.9 ml of catylist to an ounce of finish and you will never have a problem.
Title: Re: Fuller -Plast users
Post by: Bryan on March 17, 2007, 10:29:00 PM
Good idea...You can't beat T-Bird


Bryan M. Lee
Text only | Text with Images