Print Page - Spine Tester

Title: Spine Tester
Post by: fflintlock on February 25, 2007, 11:17:00 AM

Does anyone have a recipe for a homemade spine tester ?
And, do they actually work as good, or pretty close to a store bought tester ?
Thanks,
Jerald

Title: Re: Spine Tester
Post by: Bowmania on February 25, 2007, 11:27:00 AM

This site or the LW had pictures and discussion on one. Looked like a great and simple idea.

Bowmania

Title: Re: Spine Tester
Post by: waterone on February 25, 2007, 11:32:00 AM

Do a search on this site for a lot of info, but check out this thread:

topic, easy spine tester (http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=040744)

waterone

Title: Re: Spine Tester
Post by: painthorse on February 25, 2007, 12:52:00 PM

http://www.jamesmhill.com/Spine_Tester.html
I have built two of these.Easy to build and as good as store bought.

Title: Re: Spine Tester
Post by: Lefty on February 25, 2007, 07:06:00 PM

I agree with painthorse. Jim Hill's plans are easy to follow and make a very accurate spine tester.

Title: Re: Spine Tester
Post by: poekoelan on February 25, 2007, 10:31:00 PM

I prefer the protractor type, but the dial indicator is a good one too. If you decide to go the dial route, make sure it has at least an inch of travel and check the resistance on the plunger, you may or may not have to compensate for it somehow. I know some have done that ( compensated for the spring pressure ) but I can't quite remember what they did.

Trad Gang

Main Boards => PowWow => Topic started by: fflintlock on February 25, 2007, 11:17:00 AM