evening folks, Is there any difference in cutting diameter in the various weights in the snuffers. thanks
Yep, the bigger they are the more they cut. 100's start at 1.25 and the 160 is just shy of 1.5. Lots more steel and strength in the bigger ones too.
SBM, said it. The 160's make a massive hole.
I think the 160 cuts an inch an 3/8 hole... But whatever it is its freaking huge. I like shooting the 145gr myself. I dont think that there is a big difference in the 145 and the 160 gr versions.
It's an inch and 15/32nds on the 160. Most broadheads dream of holes this broadhead leaves.
Bowmania
The 160 is the biggest and toughest.
Yea, I'm a pretty big fan of the big Snuffers. I even named my dog after them! I switch back and forth alot between Snuffers and Woodsmans for deer. Both are great heads. I also use a 2 blade eclipse alot too. It all just depends on what bow I'm shooting. If I'm shooing something low poundage like my 46lb. Dakota, then I go with the 2 blade. For everything else I normally use 3 blade heads.
Like Jon, I use a variety of different broadheads. I like 'em all. Woodsmans, Z's, Magnus I, II, Ribtek, Grizzly, Ace. But there ain't nothing comes close to that nasty Snuffer 160.