I have an old Asbell over the shoulder style quiver and I am in need of a new "arrow gripper". I believe that this part is still available but haven't been able to locate one. Any suggestions would be appreciated! Thanks, Mike
I'm in the process of making one of my own that is on that order. I'm using a Great Northern replacement part,and going to thread a rod to screw into the replacement rubber. It looks like the GFA one is similar.
I've got an GN laying around somewhere, I may give that a try! :thumbsup:
Have you contacted Asbell. I don't know who makes these quivers for them but they might be able to help you find a new gripper.
This is a GFA style quiver I made as my primary hunting quiver. I removed the arrow gripper and hood from the limb mounting and attached it to a wood slat. I covered the wood with a scrap of snake skin for decoration and you can see the a fleece fletch cover wrapped around the wood slat until needed.
(https://i.imgur.com/1dfkBbl.jpg)
(https://i.imgur.com/1bZsniw.jpg)
Contact the Asbell's. I am almost certain they have grippers.
Pretty certain that was the old Delta quiver.
:campfire: :coffee: :archer2: :campfire:
Thanks for the replies gentlemen. Going to contact Asbell's now!
My GFA style quiver is an old Selway bow quiver.